The Valid8 Security Test Suites are suitable for auditing security of 3G UMTS network nodes including NodeB, RNC, SGSN, GGSN, MSC and HLR according to standards including NESAS, 3GPP.

The Valid8 Security Test Suites are suitable for auditing security of 4G LTE network nodes including UE, eNodeB, MME, SGW, PGW, according to standards including NESAS, 3GPP.

The Valid8 5G AMF Conformance Test Suite is suitable for testing 5G AMF protocols and interfaces in the wireless and wireline network, including STIR/SHAKEN.

The Valid8 Security Test Suites are suitable for auditing security of 5G network nodes including UE, gNodeB, AMF, SMF, UPF, according to standards including NESAS SCAS, 3GPP.

The Valid8 Cell Broadcast Functional Test Suite is suitable for testing a variety of features on the Cell Broadcast device including attach/detach, session establishment, IPv4/6, throughput, mission critical (MCX), flood messages, authentication, SMS, emergency attach, location, power-level, and mobility. It runs in conjunction with M5 UE Tester (required)

The Valid8 P25 ISSI CSSI Conformance Suites are suitable for testing compliance to standards for CAP, TIA, IETF in the P25 domain and includes an implementation of the P25 CAP ISSI/CSSI Conformance Test Tool (ICC Test Tool / ICCTT).

The Valid8 SIGTRAN SS7 Conformance Test Suites are suitable for testing compliance to standards for SCTP, M3UA, SCCP, TCAP, INAP, CAMEL, ISUP.

The Valid8 SIP Conformance Test Suites are suitable for testing SIP protocol and interfaces in the wireless and wireline network including STIR/SHAKEN

Emulators are software or hardware-based solutions that enable operators to mimic specific components of the mobile network to test security, performance and capacity.

Valid8 Ethernet Load Tester addresses complex testing challenges for multi-protocol environments including DHCP, DNS, LDAP

Valid8 IMS Loader SOLVES Complex testing challenges for multi-protocol environments without the need for an expensive commercial mobile core network

The Valid8 Security Test Suites are suitable for auditing security of IMS network nodes including UE, CSCF, and AS, according to standards including NESAS SCAS, 3GPP.

The Valid8 IoT Functional Test Suite is suitable for testing a variety of features on the IoT device including attach/detach, session establishment, IPv4/6, throughput, mission critical (MCX), flood messages, authentication, SMS, emergency attach, location, power-level, and mobility. It runs in conjunction with M5 UE Tester (required).

The Valid8 Security Test Suites are suitable for auditing security of IoT network nodes including Client and Server, according to standards including 3GPP.

Loaders enable the user to run customizable message flows for many different protocols. Each Loaders focuses on a specific area (e.g. mobile security), interface (e.g. 5G SA N2) or protocol (e.g. SIP). These suites are extensible by the end user or by Valid8's engineering services.

Valid8's M1 IoT Tester is a simple hardware-based callbox solution that mimics 4G RAN (plus 5G RAN option) along with a core network lite emulator to test IoT user equipment (UE) devices

Valid8's M1 Mobile UE Tester is a simple hardware-based solution that mimics 4G RAN (plus 5G RAN option) along with a core network lite emulator to test user equipment (UE) devices

The Valid8 Mobile UE Emulator provides a cost-effective, scalable, simulation solution for generating realistic 4G/5G UE calls in testing scenarios. It is available as a hardware solution with RF cards on our M5 platform, or it can run as a software-only solution without RF.

Valid8's Mobile UE Tester is a hardware-based solution that mimics 4G & 5G RAN along with a customizable core network emulator to test user equipment (UE) devices

The Valid8 MCX Conformance Test Suites are suitable for testing compliance to standards for MC-PTT, MC-Video, MC-Data protocols and interfaces in the MCX domain

Valid8 MCX Loader Solves complex challenges for multi-protocol environments including MCX.

The Valid8 MCX IWF Emulator provides an all-in-one, cost-effective and ultra-portable MCX network for demonstration, testing and training purposes.

The Valid8 Security Test Suites are suitable for auditing security of MCX network nodes including UE Client, Server, IWF, Console, RAN, Core, BMSC, PCRF, according to standards including NESAS, 3GPP.

The Valid8 MCX Server Emulator provides an all-in-one, cost-effective and ultra-portable MCX network for demonstration, testing and training purposes.

AMARI Callbox is the ideal solution for testing 5G NSA and SA, LTE, LTE-M and NB-IoT devices. It acts as a 3GPP compliant eNB/gNB and EPC/5GC allowing functional and performance testing. The Callbox is powered by a deployment quality software suite. AMARI Callbox Series offers 4 different options: Mini, Classic, Advanced and Ultimate.

Amarisoft UE simulator is an ideal solution to support functional and performance testing of 4G and 5G networks. Acting as a 3GPP compliant LTE, NB-IOT and NR UE, it can simulate hundreds of UEs sharing the same spectrum.

The Valid8 NG911 BCF Emulator provides an all-in-one, cost-effective and ultra-portable NG911 BCF network node for demonstration, testing and training purposes.

The Valid8 Security Test Suites are suitable for auditing security of P25 network nodes including Console, RFSS, IWF, according to standards including TIA.

Valid8 Protocol Engine is Designed specifically for testing signaling systems such as telecommunications and network equipment, web applications and APIs, and appliances.

Emulators are software or hardware-based solutions that enable operators to mimic specific components of the mobile network to test security, performance and capacity.

Simul8r enables the user to create and run customizable message flows for many different simulated protocols. Each Toolkit focuses on a specific area (e.g. mobile security), interface (e.g. 5G N2) or protocol (e.g. SIP). These Toolkits are extensible by the end user or by Valid8's engineering services.

The Valid8 UE Test Suite is suitable for testing a variety of features on the UE device including attach/detach, session establishment, IPv4/6, throughput, mission critical (MCX), flood messages, authentication, SMS, emergency attach, location, power-level, and mobility. It runs in conjunction with M5 UE Tester (required).

The software-based DHCP load tester can simulate clients to test DHCP servers, or simulate DHCP server to test clients, with customizable message flows and content.

Diameter protocol signaling load is increasing due to subscriber growth. Operators need to prove their networks can scale reliably and have the necessary capacity and built-in redundancy. Network equipment manufacturers (NEMs) need to test at all stages of the product life-cycle and conduct acceptance testing at the operator. The Valid8 Diameter Load Tester provides testing capabilities across numerous Diameter interfaces in fixed and mobile networks such as Cx, Dx, Ga, Gd, Gx, Gy, Nasreq, Rf, Rx, S6a, S6c, S6d, S6m, S6n, S6t, S13, Sd, Sh, Swx, T6ai, T6bi, Tsp, Zh.

The Valid8 Fixed Network Tester enables testing of SIP, POTS (FXO/FXS), ISDN PRI, ISUP (SIGTRAN), Megaco/H,248, MGCP/NCS and RTP.

GPRS Tunnelling Protocol (GTP) is an IP -based protocol that carries session information between nodes within a Mobile network. GTP consists of three separate sub-protocols, GTP-C, GTP-U and GTP'. GTP-C is used between SGSN and GGSN in 3G and between SGW and PGW in 4G to create, modify and delete sessions or PDP contexts. GTP-U is used between the RAN and the core network to carry the user-plane (U-plane) IPv4 or IPv6 data from the UE. GTP' (GTP prime) is used between the CDF and CGF to carry charging information. GTP uses either UDP or TCP transport protocol and there are different versions including v0, v1 and v2. The Valid8 GTP Load Tester provides testing capabilities across numerous GTP interfaces in fixed and mobile networks such as S2b, S5, S10, S11, Gn

The Mobile Loader is an application that provides emulation of UEs and gNB, eNB, NB to test 3G 4G 5G mobile core networks.

The Valid8 NGN tester enables testing of SIP, ISUP, Megaco/H.248 and RTP/RTCP.

RADIUS is an authentication, authorization, and accounting protocol used pervasively in telecom and datacom networks that manages network access. The Valid8 Radius Load Tester provides load testing capabilities across numerous Radius interfaces in fixed and mobile networks.

The SIGTRAN Mobile Application Part (MAP) is an SS7 protocol that provides an application layer for the various nodes in GSM and UMTS mobile core networks and GPRS core networks to communicate with each other in order to provide services to users. The Mobile Application Part is the application-layer protocol used to access the Home Location Register, Visitor Location Register, Mobile Switching Center, Equipment Identity Register, Authentication Centre, Short message service center and Serving GPRS Support Node (SGSN). The CAMEL Application Part (CAP) is a signaling protocol used in the Intelligent Network architecture.