Valid8.com/ACATS VoIP Megaco/H.248 Conformance Test Suite for MGC/MG and PGC/PG testing, for use with H.248 Megaco Signaling Tester
TEST SUITE OVERVIEW
References
Archive/Project voip/Megaco_TS
Version 19171599
Date 09 Aug 2008
Number of Scenarios 370
Number of Groups 47
Average per Group 7
GROUP/SCENARIO TEST PURPOSE
Text_Mode
Text_Mode/
MG
H248_MG_TXT_Start_01 Wait for ServiceChangeReq, send response, est. connection
the tester and the SUT.
Initial condition: any
User Action: Generate a Service Change event, "Cold Reboot"
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 [1]
H248_MG_TXT_Start_02 Wait for ServiceChangeReq, send response, est. connection
the tester and the SUT. Send Modify(s) / Audit(s).
Initial condition: any
User Action: Generate a Service Change event, "Cold Reboot"
Config: Config1
SUT: AMG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 [1]
Text_Mode/
MG/
AD
Text_Mode/
MG/
AD/
BV
H248_MG_TXT_AD_BV_01 Init: any. Test: Sends Transaction Rq ADD, CID=CHOOSE, TID=CHOOSE

Initial condition: any
Ensure that the IUT, on receipt of a Transaction request containing
Action request with
CID set to CHOOSE
ADD Command request with
TID set to CHOOSE
acceptable descriptors (note: e.g. for creation of
a RTP Termination)
sends a Transaction reply containing
Action reply with
CID set to a specific value (assigned by the MG)
ADD Command reply with
TID set to a specific value (assigned by the MG).
Initial condition: any
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.1
H248_MG_TXT_AD_BV_02 Init: 1 phy term=TID1 & not outOfService in CID=NULL. Test: Sends Transaction Rq ADD, CID=CHOOSE, TID=TID1
The physical Termination TID1 shall NOT be in serviceState "outOfService".
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CHOOSE
ADD Command request with
TID set to TID1
acceptable descriptors
sends a Transaction Reply containing
Action reply with
CID set to a specific value (assigned by the MG)
ADD Command reply with
TID set to TID1.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.1
H248_MG_TXT_AD_BV_03 Init: 2 phy term=TID1,TID2 & not outOfService in CID=NULL. Test: Sends Transaction Rq ADD, CID=CHOOSE, TID=ALL
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CHOOSE
ADD Command request with
TID set to ALL(p12)
acceptable descriptors
sends a Transaction Reply containing
Action reply with
CID set to a specific value (assigned by the MG)
ADD Command reply with
TID set to TID1
ADD Command
TID set to TID2.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.1
H248_MG_TXT_AD_BV_04 Init: 1 eph term=TID1 in CID=CID1. Test: Sends Transaction Rq ADD, CID=CID1, TID=CHOOSE
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CID1
ADD Command request with
TID set to CHOOSE
acceptable descriptors
(note: e.g. for creation of a RTP Termination)
sends a Transaction Reply containing
Action reply with
CID set to CID1
ADD Command reply with
TID set to a specific value (assigned by the MG).
Initial condition: a Termination characterized by TID1 in a Context, characterized by CID1.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.1
H248_MG_TXT_AD_BV_05 Init: 2 phy term=TID1,TID2 & not outOfService in CID=NULL, 1 eph term=TID3 in CID=CID1, Test: Sends Transaction Rq ADD, CID=CID1, TID=ALL
The physical Terminations TID1 and TID2 shall NOT be in serviceState "outOfService".
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CID1
ADD Command request with
TID set to ALL(p12)
acceptable descriptors
sends a Transaction Reply containing
Action reply with
CID set to CID1
ADD Command reply with
TID set to TID1
ADD Command reply with
TID set to TID2.
The physical Terminations TID1 and TID2 shall NOT be in serviceState "outOfService".
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.1
H248_MG_TXT_AD_BV_06 Init: 1 phy term=TID2 & not outOfService in CID=NULL, 1 eph term=TID1 in CID=CID1. Test: Sends Transaction Rq Add, CID=CID1, TID=TID2
Initial condition: A physical Termination, characterized by TID2, in the NULL Context and
a Termination (TID1) in Context CID1. The terminations TID1 and TID2 shall
NOT be in serviceState, "outOfService".
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CID1
ADD Command request with
TID set to TID2
acceptable descriptors
sends a Transaction Reply containing
Action reply with
CID set to CID1
ADD Command reply with
TID set to TID2

a Termination (TID1) in Context CID1. The terminations TID1 and TID2 shall
NOT be in serviceState, "outOfService".
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.1
H248_MG_TXT_AD_BV_07 Init: 2 eph term=TID1,TID2 in CID=CID1,CID2 (not NULL CID). Test: Sends Transaction Rq Add, CID=ALL, TID=CHOOSE
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to ALL
ADD Command request with
TID set to CHOOSE
acceptable descriptors
sends a Transaction Reply containing
Action reply with
CID set to CID1
ADD Command reply with
TID set to TID3
Action reply with
CID set to CID2
ADD Command reply with
TID set to TID4
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.1
Text_Mode/
MG/
AD/
BI
H248_MG_TXT_AD_BI_01 Init: any. Test: Send Transaction Rq ADD, CID=CHOOSE, TID=ROOT
Initial condition: any
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CHOOSE
ADD Command request with
TID set to ROOT
sends a Transaction Reply containing
Action reply with
CID set to CHOOSE
ADD Command reply with
TID set to ROOT
Error descriptor (value 410 "Incorrect Identifier")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clauses 7.2.1 and 6.2.5
H248_MG_TXT_AD_BI_02 Init: 1 eph term=TID1 in CID=CID1. Test: Send Transaction Rq ADD, CID=CID1, TID=ROOT
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CID1
ADD Command request with
TID set to ROOT
sends a Transaction Reply containing
Action reply with
CID set to CID1
ADD Command reply with
TID set to ROOT
Error descriptor (value 410 "Incorrect Identifier")

Initial condition: a Termination (TID1) in a Context, characterized by CID1.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clauses 7.2.1 and 6.2.5
H248_MG_TXT_AD_BI_03 Init: 2 eph term=TID1,TID2 in CID=CID1,CID2 (not NULL CID). Test: Send Transaction Rq ADD, CID=ALL, TID=ALL
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to ALL
ADD Command request with
TID set to ALL
sends a Transaction Reply containing
Action reply with
CID set to CID1
ADD Command reply with
TID set to TID1
Error descriptor (value 433 "TerminationID is already in a Context")

Action reply with
CID set to CID2
ADD Command reply with
TID set to TID2
Error descriptor (value 433 "TerminationID is already in a Context")

Initial condition: 2 Terminations (TID1 and TID2) each in a Context, characterized by CID1 and CID2 (NULL Context is excluded).
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.1
H248_MG_TXT_AD_BI_04 Init: 2 eph term=TID1,TID2 in CID=CID1,CID2 (not NULL CID). Test: Send Transaction Rq ADD, CID=ALL, TID=TID1
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to ALL
ADD Command request with
TID set to a specific TID (e.g. TID1),
sends a Transaction Reply containing
Action reply with
CID set to CID1
ADD Command reply with
TID set to TID1
Error descriptor (value 433 "TerminationID is already in a Context")
Initial condition: 2 Terminations (TID1 and TID2) each in a Context, characterized by CID1 and CID2 (NULL Context is excluded).
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.1
H248_MG_TXT_AD_BI_05 Init: 2 eph term TID1,TID2 in CID=CID1,CID2 (not NULL CID). Test: Send Transaction Rq ADD, CID=ALL, TID=ROOT
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to ALL
ADD Command request with
TID set to ROOT,
sends a Transaction Reply containing
Action reply with
CID set to ALL
ADD Command reply with
TID set to ROOT
Error descriptor (value 410 "Incorrect Identifier")
Initial condition: 2 Terminations (TID1 and TID2) each in a Context, characterized by CID1 and CID2 (NULL Context is excluded).
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clauses 7.2.1 and 6.2.5
H248_MG_TXT_AD_BI_06 Init: 2 phy term=TID1,TID2 in CID=NULL. Test: Send Transaction Rq ADD, CID=NULL, TID=TID1
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to NULL
ADD Command request with
TID set to a specific TID1
sends a Transaction Reply containing
Action reply with
CID set to NULL
ADD Command reply with
TID set to TID1
Error descriptor (e.g. value 401 "Protocol Error")

Initial condition: 2 physical Terminations in the NULL Context, characterized by TID1 and TID2.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.1
H248_MG_TXT_AD_BI_07 Init: 2 phy term TID1,TID2 in CID=NULL. Test: Send Transaction Rq ADD, CID=NULL, TID=ALL
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to NULL
ADD Command request with
TID set to ALL
sends a Transaction Reply containing
Action reply with
CID set to NULL
ADD Command reply with
TID set to ALL
Error descriptor (e.g. value 401 "Protocol Error")

Initial condition: 2 physical Terminations in the NULL Context, characterized by TID1 and TID2.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.1
H248_MG_TXT_AD_BI_08 Init: 2 phy term TID1,TID2 in CID=NULL. Test: Send Transaction Rq ADD, CID=NULL, TID=CHOOSE
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to NULL
ADD Command request with
TID set to CHOOSE
sends a Transaction Reply containing
Action reply with
CID set to NULL
ADD Command reply with
TID set to CHOOSE
Error descriptor (e.g. value 401 "Protocol Error")
Initial condition: 2 physical Terminations in the NULL Context, characterized by TID1 and TID2.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.1
H248_MG_TXT_AD_BI_09 Init: 2 phy term TID1,TID2 in CID=NULL. Test: Send Transaction Rq ADD, CID=NULL, TID=ROOT
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to NULL
ADD Command request with
TID set to ROOT
sends a Transaction Reply containing
Action reply with
CID set to NULL
ADD Command reply with
TID set to ROOT
Error descriptor (value 410 "Incorrect Identifier")

Initial condition: 2 physical Terminations in the NULL Context, characterized by TID1 and TID2.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clauses 7.2.1 and 6.2.5
Text_Mode/
MG/
MD
Text_Mode/
MG/
MD/
BV
H248_MG_TXT_MD_BV_01 Init: 2 eph term=TID1,TID2 in CID=CID1. Test: Sends Transaction Rq Modify, CID=CID1, TID=ALL
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CID1
MODIFY Command request with
TID set to ALL(e12)
acceptable descriptors
sends a Transaction Reply containing
Action reply with
CID set to CID1
MODIFY Command reply with
TID set to TID1
MODIFY Command reply with
TID set to TID2.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.2
H248_MG_TXT_MD_BV_02 Init: 2 eph term=TID1,TID2 in CID=CID1. Test: Send Transaction Rq Modify, CID=CID1, TID=TID1
Initial condition: 2 Terminations, characterized by TID1 and TID2 within Context CID1.
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CID1
MODIFY Command request with
TID set to TID1,
sends a Transaction Reply containing
Action reply with
CID set to CID1
MODIFY Command reply with
TID set to TID1.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.2
H248_MG_TXT_MD_BV_03 Init: 2 eph term=TID1,TID2 in CID=CID1, 2 eph term=TID3,TID4 in CID=CID2. Test: Send Transaction Rq Modify, CID=ALL, TID=ALL(e1234)
Initial condition: 2 Terminations characterized by TID1 and TID2 within Context CID1;
2 Terminations characterized by TID3 and TID4 within Context CID2.
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to ALL
MODIFY Command request with
TID set to ALL(e1234)
acceptable descriptors
sends a Transaction Reply containing
Action reply with
CID set to CID1
MODIFY Command reply with
TID set to TID1
MODIFY Command reply with
TID set to TID2
Action reply with
CID set to CID2
MODIFY Command reply with
TID set to TID3
MODIFY Command reply with
TID set to TID4.
2 Terminations characterized by TID3 and TID4 within Context CID2.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.2
H248_MG_TXT_MD_BV_04 Init: 2 eph term=TID1,TID2 in CID=CID1, 2 eph term=TID3,TID4 in CID=CID2. Test: Send Transaction Rq Modify, CID=ALL, TID=TID3
Initial condition: 2 Terminations characterized by TID1 and TID2 within Context CID1;
2 Terminations characterized by TID3 and TID4 within Context CID2.
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to ALL
MODIFY Command request with
TID set to TID3
acceptable descriptors
sends a Transaction Reply containing
Action reply with
CID set to CID2
MODIFY Command reply with
TID set to TID3
2 Terminations characterized by TID3 and TID4 within Context CID2.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.2
H248_MG_TXT_MD_BV_05 Init: 2 eph term=TID1,TID2 in CID=NULL. Test: Send Transaction Rq Modify, CID=NULL, TID=ALL(p12)
Initial condition: 2 physical Terminations (TID1 and TID2) in the NULL Context.
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to NULL
MODIFY Command request with
TID set to ALL(p12)
acceptable descriptors
sends a Transaction Reply containing
Action reply with
CID set to NULL
MODIFY Command reply with
TID set to TID1
MODIFY Command reply with
TID set to TID2.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.2
H248_MG_TXT_MD_BV_06 Init: 1 phy term=TID1 in CID=NULL. Test: Send Transaction Rq Modify, CID=NULL, TID=TID1
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to NULL
MODIFY Command request with
TID set to TID1
acceptable descriptors
sends a Transaction Reply containing
Action reply with
CID set to NULL
MODIFY Command reply with
TID set to TID1.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.2
H248_MG_TXT_MD_BV_07 Init: any. Test: Send Transaction Rq Modify, CID=NULL, TID=ROOT
Initial condition: any
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to NULL
MODIFY Command request with
TID set to ROOT
acceptable descriptors
sends a Transaction Reply containing
Action reply with
CID set to NULL
MODIFY Command reply with
TID set to ROOT.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.2
Text_Mode/
MG/
MD/
BI
H248_MG_TXT_MD_BI_01 Init: any. Test: Send Transaction Rq Modify, CID=CHOOSE, TID=CHOOSE
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CHOOSE
MODIFY Command request with
TID set to CHOOSE
sends a Transaction Reply containing
Action reply with
CID set to CHOOSE
MODIFY Command reply with
TID set to CHOOSE
Error descriptor (e.g. value 401 "Protocol Error"
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.2
H248_MG_TXT_MD_BI_02 Init: 2 eph term=TID1,TID2 in a CID, Test: Send Transaction Rq Modify, CID=CHOOSE, TID=ALL
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CHOOSE
MODIFY Command request with
TID set to ALL
sends a Transaction Reply containing
Action reply with
CID set to CHOOSE
MODIFY Command reply with
TID set to ALL
Error descriptor (e.g. value 401 "Protocol Error")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.2
H248_MG_TXT_MD_BI_03 Init: any. Test: Send Transaction Rq Modify, CID=CHOOSE, TID=ROOT
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CHOOSE
MODIFY Command request with
TID set to ROOT
sends a Transaction Reply containing
Action reply with
CID set to CHOOSE
MODIFY Command reply with
TID set to ROOT
Error descriptor (value 410 "Incorrect Identifier")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clauses 7.2.2 and 6.2.5
H248_MG_TXT_MD_BI_04 Init: Existing CID=CID1. Test: Send Transaction Rq Modify, CID=CID1, TID=CHOOSE
Initial condition: an existing Context, characterized by CID1.
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CID1
MODIFY Command request with
TID set to CHOOSE
sends a Transaction Reply containing
Action reply with
CID set to CID1
MODIFY Command reply with
TID set to CHOOSE
Error descriptor (e.g. value 401 "Protocol Error")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.2
H248_MG_TXT_MD_BI_05 Init: Existing CID=CID1. Test: Send Transaction Rq Modify, CID=CID1, TID=ROOT
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CID1
MODIFY Command request with
TID set to ROOT
sends a Transaction Reply containing
Action reply with
CID set to CID1
MODIFY Command reply with
TID set to ROOT
Error descriptor (value 410 "Protocol Error")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clauses 7.2.2 and 6.2.5
H248_MG_TXT_MD_BI_06 Init: 2 eph term=TID1,TID2 in CID=CID1,CID2. Test: Send Transaction Rq Modify, CID=ALL, TID=CHOOSE
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to ALL
MODIFY Command request with
TID set to CHOOSE
sends a Transaction Reply containing
Action reply with
CID set to ALL
MODIFY Command reply with
TID set to CHOOSE
Error descriptor (e.g. value 401 "Protocol Error")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.2
H248_MG_TXT_MD_BI_07 Init: 2 eph term=TID1,TID2 in CID=CID1,CID2. Test: Send Transaction Rq Modify, CID=ALL, TID=ROOT
Initial condition: 2 existing Contexts, characterized by CID1 and CID2 and 2 Terminations characterized by TID1 and TID2 within the Contexts.
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to ALL
MODIFY Command request with
TID set to ROOT
sends a Transaction Reply containing
Action reply with
CID set to ALL
MODIFY Command reply with
TID set to ROOT
Error descriptor (value 410 "Incorrect Identifier")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clauses 7.2.2 and 6.2.5
H248_MG_TXT_MD_BI_08 Init: 2 phy term=TID1,TID2 in CID=NULL. Test: Send Transaction Rq Modify, CID=NULL, TID=CHOOSE
Initial condition: 2 physical Terminations, characterized by TID1 and TID2, in the NULL Context.
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to NULL
MODIFY Command request with
TID set to CHOOSE
sends a Transaction Reply containing
Action reply with
CID set to NULL
MODIFY Command reply with
TID set to CHOOSE
Error descriptor (e.g. value 401 "Protocol Error")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.2
H248_MG_TXT_MD_BI_09 Init: 2 eph term=TID1,TID2 in CID=CID1. Test: Send Transaction Rq Modify, CID=CHOOSE, TID=TID1
Initial condition: 2 Terminations (TID1 and TID2) exist in a Context CID1.
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CHOOSE
MODIFY Command request with
TID set to TID1
sends a Transaction Reply containing
Action reply with
CID set to CHOOSE
MODIFY Command reply with
TID set to TID1
Error descriptor (e.g. value 401 "Protocol Error")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.2
Text_Mode/
MG/
SU
Text_Mode/
MG/
SU/
BV
H248_MG_TXT_SU_BV_01 Init: 2 eph term=TID1,TID2 in CID=CID1. Test: Send Transaction Rq Subtract, CID=CID1, TID=ALL(e12), Audit Descriptor=empty
Initial condition: 2 Terminations (TID1 and TID2) within a Context CID1
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CID1
SUBTRACT Command request with
TID set to ALL(e12)
empty Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to CID1
SUBTRACT Command reply with
TID set to TID1
SUBTRACT Command reply with
TID set to TID2.

Initial condition: 2 Terminations (TID1 and TID2) within a Context CID1
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.3
H248_MG_TXT_SU_BV_02 Init: 2 eph term=TID1,TID2 in CID=CID1. Test: Send Transaction Rq Subtract, CID=CID1, TID=ALL(e12), wildcardReturn Rq, Audit Descriptor=empty
Selection criteria: wildcardReturn request procedure implemented.
Initial condition: 2 Terminations (TID1 and TID2) within a Context CID1
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CID1
SUBTRACT Command request with
TID set to ALL(e12)
wildcardReturn request
empty Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to CID1
SUBTRACT Command reply with
TID set to ALL(e12)
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.3
H248_MG_TXT_SU_BV_03 Init: 1 eph term=TID1 in CID=CID1. Test: Send Transaction Rq Subtract, CID=CID1, TID=TID1, Audit Descriptor=empty
Initial condition: one Termination characterized by TID1 is in a Context, characterized by CID1.
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CID1
SUBTRACT Command request with
TID set to TID1
empty Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to CID1
SUBTRACT Command reply with
TID set to TID1.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.3
H248_MG_TXT_SU_BV_04 Init: 2 eph term=TID1,TID2 in CID=CID1, 2 eph term=TID3,TID4 in CID=CID2. Test: Send Transaction Rq Subtract, CID=ALL, TID=ALL(e1234), Audit Descriptor=empty, wildcardReturn request
Selection criteria: wildcardReturn request procedure implemented
Initial condition: 2 Terminations (TID1 and TID2) are in a Context CID1 and 2 Terminations (TID3 and TID4) are in a Context CID2.
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to ALL
SUBTRACT Command request with
TID set to ALL(e1234)
empty Audit Descriptor
wildcardReturn request
sends a Transaction Reply containing
Action reply with
CID set to ALL
SUBTRACT Command reply with
TID set to ALL(e1234)
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.3
12.2.2 [1]
H248_MG_TXT_SU_BV_05 Init: 2 eph term=TID1,TID2 in CID=CID1, 2 eph term=TID3,TID4 in CID=CID2. Test: Send Transaction Rq Subtract, CID=ALL, TID=ALL(e1234), Audit Descriptor=empty
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to ALL
SUBTRACT Command request with
TID set to ALL(e1234)
empty Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to CID1
SUBTRACT Command reply with
TID set to TID1
SUBTRACT Command reply with
TID set to TID2
Action reply with
CID set to CID2
SUBTRACT Command reply with
TID set to TID3
SUBTRACT Command reply with
TID set to TID4.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.3
H248_MG_TXT_SU_BV_06 Init: 2 eph term=TID1,TID2 in CID=CID1, 2 eph term=TID3,TID4 in CID=CID2. Test: Send Transaction Rq Subtract, CID=ALL, TID=TID3, Audit Descriptor= empty
Initial condition: 2 Terminations (TID1 and TID2) are in a Context CID1 and 2 Terminations (TID3 and TID4) are in a Context CID2.
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to ALL
SUBTRACT Command request with
TID set to TID3
empty Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to CID2
SUBTRACT Command reply with
TID set to TID3
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.3
Text_Mode/
MG/
SU/
BI
H248_MG_TXT_SU_BI_01 Init: any. Test: Send Transaction Rq Subtract, CID=CHOOSE, TID=CHOOSE
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CHOOSE
SUBTRACT Command request with
TID set to CHOOSE
sends a Transaction Reply containing
Action reply with
CID set to CHOOSE
SUBTRACT Command reply with
TID set to CHOOSE
Error descriptor (e.g. value 401 "Protocol Error")
Initial condition: any
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.3
H248_MG_TXT_SU_BI_02 Init: 2 eph term=TID1,TID2 in CID=CID1. Test: Send Transaction Rq Subtract, CID=CHOOSE, TID=ALL(e12)
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CHOOSE
SUBTRACT Command request with
TID set to ALL(e12)
sends a Transaction Reply containing
Action reply with
CID set to CHOOSE
SUBTRACT Command reply with
TID set to ALL
Error descriptor (e.g. value 401 "Protocol Error")

Initial condition: 2 Terminations (TID1 and TID2) in Context CID1.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.3
H248_MG_TXT_SU_BI_03 Init: 2 eph term=TID1,TID2 in CID=CID1. Test: Send Transaction Rq Subtract, CID=CHOOSE, TID=TID1
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CHOOSE
SUBTRACT Command request with
TID set to TID1
sends a Transaction Reply containing
Action reply with
CID set to CHOOSE
SUBTRACT Command reply with
TID set to TID1
Error descriptor (e.g. value 401 "Protocol Error")

Initial condition: 2 Terminations (TID1 and TID2) in Context CID1
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.3
H248_MG_TXT_SU_BI_04 Init:any. Test: Send Transaction Rq Subtract, CID=CHOOSE, TID=ROOT
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CHOOSE
SUBTRACT Command request with
TID set to ROOT
sends a Transaction Reply containing
Action reply with
CID set to CHOOSE
SUBTRACT Command reply with
TID set to ROOT
Error descriptor (value 410 "Incorrect Identifier")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clauses 7.2.3 and 6.2.5
H248_MG_TXT_SU_BI_05 Init: 1 eph term=TID1 in CID=CID1. Test: Send Transaction Rq Subtract, CID=CID1, TID=CHOOSE
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CID1
SUBTRACT Command request with
TID set to CHOOSE
sends a Transaction Reply containing
Action reply with
CID set to CID1
SUBTRACT Command reply with
TID set to CHOOSE
Error descriptor (e.g. value 401 "Protocol Error")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.3
H248_MG_TXT_SU_BI_06 Init: 1 eph term=TID1 in CID=CID1. Test: Send Transaction Rq Subtract, CID=CID1, TID=ROOT
Initial condition: a Termination characterized by TID1 in a Context, characterized by CID1.
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CID1
SUBTRACT Command request with
TID set to ROOT
sends a Transaction Reply containing
Action reply with
CID set to CID1
SUBTRACT Command reply with
TID set to ROOT
Error descriptor (value 410 "Incorrect identifier")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clauses 7.2.3 and 6.2.5
H248_MG_TXT_SU_BI_07 Init: 2 eph term=TID1 in CID=CID1,CID2. Test: Send Transaction Rq Subtract, CID=ALL, TID=CHOOSE
and Terminations characterized by TID1 and TD2 within the Contexts.
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to ALL
SUBTRACT Command request with
TID set to CHOOSE
sends a Transaction Reply containing
Action reply with
CID set to ALL
SUBTRACT Command reply with
TID set to CHOOSE
Error descriptor (e.g. value 401 "Protocol Error")

Initial condition: 2 existing Contexts, characterized by CID1 and CID2
and Terminations characterized by TID1 and TD2 within the Contexts.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.3
H248_MG_TXT_SU_BI_08 Init: 2 eph term=TID1,TID2 in CID=CID1, 2 ePh term=TID3,TID4 in CID=CID2. Test: Send Transaction Rq Subtract, CID=ALL, TID=ROOT
Initial condition: 2 Terminations (TID1 and TID2) are in Context CID1, 2 Termination (TID3, TID4) are in Context CID2.
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to ALL
SUBTRACT Command request with
TID set to ROOT
sends a Transaction Reply containing
Action reply with
CID set to ALL
SUBTRACT Command reply with
TID set to ROOT
Error descriptor (value 410 "Incorrect Identifier")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clauses 7.2.3 and 6.2.5
H248_MG_TXT_SU_BI_09 Init: 2 phys term=TID1,TID2 in CID=NULL. Test: Send Transaction Rq Subtract, CID=NULL, TID=CHOOSE
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to NULL
SUBTRACT Command request with
TID set to CHOOSE
sends a Transaction Reply containing
Action reply with
CID set to NULL
SUBTRACT Command reply with
TID set to CHOOSE
Error descriptor (e.g. value 401 "Protocol Error")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.3
H248_MG_TXT_SU_BI_10 Init: 2 phys term=TID1,TID2 in CID=NULL. Test: Send Transaction Rq Subtract, CID=NULL, TID=ALL(p12)
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to NULL
SUBTRACT Command request with
TID set to ALL(p12)
sends a Transaction Reply containing
Action reply with
CID set to NULL
SUBTRACT Command reply with
TID set to ALL (p12)
Error descriptor (e.g. value 401 "Protocol Error")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.3
H248_MG_TXT_SU_BI_11 Init: 2 phys term=TID1,TID2 in CID=NULL. Test: Send Transaction Rq Subtract, CID=NULL, TID=TID1
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to NULL
SUBTRACT Command request with
TID set to TID1
sends a Transaction Reply containing
Action reply with
CID set to NULL
SUBTRACT Command reply with
TID set to TID1
Error descriptor (e.g. value 401 "Protocol Error")

Initial condition: 2 physical Terminations (TID1 and TID2) exist in the NULL Context.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.3
H248_MG_TXT_SU_BI_12 Init: 2 Phys term=TID1,TID2 in CID=NULL. Test: Send Transaction Rq Subtract, CID=NULL, TID=ROOT
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to NULL
SUBTRACT Command request with
TID set to ROOT
sends a Transaction Reply containing
Action reply with
CID set to NULL
SUBTRACT Command reply with
TID set to ROOT
Error descriptor (value 410 "Incorrect Identifier")

Initial condition: 2 physical Terminations (TID1 and TID2) exist in the NULL Context.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clauses 7.2.3 and 6.2.5
Text_Mode/
MG/
MO
Text_Mode/
MG/
MO/
BV
H248_MG_TXT_MO_BV_01 Init: 2 eph term=TID1,TID2 in CID=CID1, 2 eph term=TID3,TID4 in CID=CID2. Test: Send Transaction Rq Move, CID=CID2, TID=ALL(e12)
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CID2
MOVE Command request with
TID set to ALL(e12)
acceptable descriptors
sends a Transaction Reply containing
Action reply with
CID set to CID2
MOVE Command reply with
TID set to TID1
MOVE Command reply with
TID set to TID2.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.4
H248_MG_TXT_MO_BV_02 Init: 2 eph term=TID1,TID2 in CID=CID1, 2 eph term=TID3,TID4 in CID=CID2. Test: Send Transaction Rq Move, CID=CID2, TID=TID2
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CID2
MOVE Command request with
TID set to TID2
acceptable descriptors
sends a Transaction Reply containing
Action reply with
CID set to CID2
MOVE Command reply with
TID set to TID2.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.4
H248_MG_TXT_MO_BV_03 Init: 2 eph term=TID1,TID2 in CID=CID1. Test: Send Transaction Rq Move, CID=CHOOSE, TID=ALL(e12)
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CHOOSE
MOVE Command request with
TID set to ALL(e12)
acceptable descriptors
sends a Transaction Reply containing
Action reply with
CID set to CID2 (assigned by MG, CID1 is deleted by the MG)
MOVE Command reply with
TID set to TID1
MOVE Command reply with
TID set to TID2
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.4
H248_MG_TXT_MO_BV_04 Init: 2 eph term=TID1,TID2 in CID=CID1. Test: Send Transaction Rq Move, CID=CHOOSE, TID=TID1
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CHOOSE
MOVE Command request with
TID set to TID1
acceptable descriptors
sends a Transaction Reply containing
Action reply with
CID set to CID2 (assigned by the MG)
MOVE Command reply with
TID set to TID1
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.4
Text_Mode/
MG/
MO/
BI
H248_MG_TXT_MO_BI_01 Init: any. Test: Send Transaction Rq Move, CID=CHOOSE, TID=CHOOSE
Action request with
CID set to CHOOSE
MOVE Command request with
TID set to CHOOSE
sends a Transaction Reply containing
Action reply with
CID set to CHOOSE
MOVE Command reply with
TID set to CHOOSE
Error descriptor (e.g. value 401 "Protocol Error")

Initial condition: any
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.4
H248_MG_TXT_MO_BI_02 Init: any. Test: Send Transaction Rq Move, CID=CHOOSE, TID=ROOT
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CHOOSE
MOVE Command request with
TID set to ROOT
sends a Transaction Reply containing
Action reply with
CID set to CHOOSE
MOVE Command reply with
TID set to ROOT
Error descriptor (value 410 "Incorrect Identifier")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clauses 7.2.4 and 6.2.5
H248_MG_TXT_MO_BI_03 Init: 1 eph term=TID1 in CID=CID1. Test: Send Transaction Rq Move, CID=CID1, TID=CHOOSE
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CID1
MOVE Command request with
TID set to CHOOSE
sends a Transaction Reply containing
Action reply with
CID set to CID1
MOVE Command reply with
TID set to CHOOSE
Error descriptor (e.g. value 401 "Protocol Error")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.4
H248_MG_TXT_MO_BI_04 Init: 1 eph term=TID1 in CID=CID1. Test: Send Transaction Rq Move, CID=CID1, TID=ROOT
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CID1
MOVE Command request with
TID set to ROOT
sends a Transaction Reply containing
Action reply with
CID set to CID1
MOVE Command reply with
TID set to ROOT
Error descriptor (value 410 "Incorrect Identifier")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clauses 7.2.4 and 6.2.5
H248_MG_TXT_MO_BI_05 Init: 2 eph term=TID1,TID2 in CID=CID1, 2 eph term=TID3,TID4 in CID=CID2. Test: Send Transaction Rq Move, CID=ALL, TID=ALL(e1234)
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to ALL
MOVE Command request with
TID set to ALL(e1234)
sends a Transaction Reply containing
Action reply with
CID set to ALL
MOVE Command reply with
TID set to ALL(e1234)
Error descriptor (e.g. value 401 "Protocol Error")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.4
H248_MG_TXT_MO_BI_06 Init: 2 phys term=TID1,TID2 in CID=CID1, 2 phys term=TID3,TID4 in CID=CID2. Test: Send Transaction Rq Move, CID=ALL, TID=CHOOSE
Initial condition: 2 physical Terminations (TID1 and TID2) in Context CID1, 2 physical Termination (TID3, TID4) in Context CID2.
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to ALL
MOVE Command request with
TID set to CHOOSE
sends a Transaction Reply containing
Action reply with
CID set to ALL
MOVE Command reply with
TID set to CHOOSE
Error descriptor (e.g. value 401 "Protocol Error")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.4
H248_MG_TXT_MO_BI_07 Init: 2 phys term=TID1,TID2 in CID=CID1, 2 phys term=TID3,TID4 in CID=CID2. Test: Rx Transaction Rq Move, CID=ALL, TID=TID1
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to ALL
MOVE Command request with
TID set to TID1
sends a Transaction Reply containing
Action reply with
CID set to ALL
MOVE Command reply with
TID set to TID1
Error descriptor (e.g. value 401 "Protocol Error")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.4
H248_MG_TXT_MO_BI_08 Init: 2 phys term=TID1,TID2 in CID=CID1, 2 phys term=TID3,TID4 in CID=CID2. Test: Send Transaction Rq Move, CID=ALL, TID=ROOT
Selection criteria: ROOT Termination implemented
Initial condition: 2 physical Terminations (TID1 and TID2) in Context CID1, 2 physical Termination (TID3, TID4) in Context CID2.
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to ALL
MOVE Command request with
TID set to ROOT
sends a Transaction Reply containing
Action reply with
CID set to ALL
MOVE Command reply with
TID set to ROOT
Error descriptor (value 410 "Incorrect identifier")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clauses 7.2.4 and 6.2.5
H248_MG_TXT_MO_BI_09 Init: 2 phys term=TID1,TID2 in CID=NULL. Test: Send Transaction Rq Move, CID=NULL, TID=CHOOSE
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to NULL
MOVE Command request with
TID set to CHOOSE
sends a Transaction Reply containing
Action reply with
CID set to NULL
MOVE Command reply with
TID set to CHOOSE
Error descriptor (e.g. value 401 "Protocol Error")

Initial condition: 2 physical Terminations (TID1 and TID2) in the NULL Context.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.4
H248_MG_TXT_MO_BI_10 Init: 2 phys term=TID1,TID2 in CID=NULL. Test: Send Transaction Rq Move, CID=NULL, TID=ROOT
Initial condition: 2 physical Terminations (TID1 and TID2) in the NULL Context.
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to NULL
MOVE Command request with
TID set to ROOT
sends a Transaction Reply containing
Action reply with
CID set to NULL
MOVE Command reply with
TID set to ROOT
Error descriptor (value 410 "Incorrect Identifier")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clauses 7.2.4 and 6.2.5
H248_MG_TXT_MO_BI_11 Init: 2 phys term=TID1,TID2 in CID=CID1, 2 phys term=TID3,TID4 in CID=CID2. Test:Send Transaction Rq Move, CID=NULL, TID=ALL(p12)
Initial condition: 2 physical Terminations (TID1 and TID2) in Context CID1, 2 physical Terminations (TID3 and TID4) in Context CID2
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to NULL
MOVE Command request with
TID set to ALL(p12)
sends a Transaction Reply containing
Action reply with
CID set to NULL
MOVE Command reply with
TID set to ALL(p12)
Error descriptor (e.g. value 401 "Protocol Error")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.4
H248_MG_TXT_MO_BI_12 Init: 2 phys term=TID1,TID2 in CID=CID1, 2 phys term=TID3,TID4 in CID=CID2. Test: Send Transaction Rq Move, CID=NULL, TID=TID1
Initial condition: 2 physical Terminations (TID1 and TID2) in Context CID1, 2 physical Terminations (TID3 and TID4) in Context CID2
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to NULL
MOVE Command request with
TID set to TID1
sends a Transaction Reply containing
Action reply with
CID set to NULL
MOVE Command reply with
TID set to TID1
Error descriptor (e.g. value 401 "Protocol Error")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.4
Text_Mode/
MG/
AV
Text_Mode/
MG/
AV/
BV
H248_MG_TXT_AV_BV_01 Init: 2 eph term=TID1,TID2 in CID=CID1, Rx Transaction Rq Audit Value, CID=CID1, TID=ALL(e12)
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CID1
AUDIT VALUE Command request with
TID set to ALL(e12)
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to CID1
AUDIT VALUE Command reply with
TID set to TID1
AUDIT VALUE Command reply with
TID set to TID2
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
H248_MG_TXT_AV_BV_02 Init: 2 eph term=TID1,TID2 in CID1. Test: Send Transaction Rq Audit Value, CID=CID1, TID=TID1
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CID1
AUDIT VALUE Command request with
TID set to TID1
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to CID1
AUDIT VALUE Command reply with
TID set to TID1
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
H248_MG_TXT_AV_BV_03 Init: 2 eph term=TID1,TID2 in CID=CID1, 2 eph term=TID3,TID4 in CID=CID2. Test: Send Transaction Rq Audit Value, CID=ALL, TID=ALL(e23)
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to ALL
AUDIT VALUE Command request with
TID set to ALL(e23)
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to CID1
AUDIT VALUE Command reply with
TID set to TID2
Action reply with
CID set to CID2
AUDIT VALUE Command reply with
TID set to TID3
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
H248_MG_TXT_AV_BV_04 Init: 2 eph term=TID1,TID2 in CID=CID1, 2 eph term=TID3,TID4 in CID=CID2. Test: Send Transaction Rq Audit Value, CID=ALL, TID=TID1
2 Terminations (TID1 and TID2) in Context CID1, 2 Terminations (TID3 and TID4) in Context CID2.
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to ALL
AUDIT VALUE Command request with
TID set to TID1
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to CID1
AUDIT VALUE Command reply with
TID set to TID1
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
H248_MG_TXT_AV_BV_05 Init: 2 eph term=TID1,TID2 in CID=CID1, 2 eph term=TID3,TID4 in CID=CID2. Test: Send Transaction Request Audit Value, CID=ALL, TID=ROOT
2 Terminations (TID3, TID4) in Context CID2.
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to ALL
AUDIT VALUE Command request with
TID set to ROOT
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to CID1
with an empty list of commands
Action reply with
CID set to CID2
with an empty list of commands
2 Terminations (TID3, TID4) in Context CID2.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
H248_MG_TXT_AV_BV_06 Init: 2 phys term=TID1,TID2 in CID=NULL. Test: Send Transaction Rq Audit Value, CID=NULL, TID=ALL(p12)
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to NULL
AUDIT VALUE Command request with
TID set to ALL(p12)
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to NULL
AUDIT VALUE Command reply with
TID set to TID1
AUDIT VALUE Command reply with
TID set to TID2

Initial condition: 2 physical Terminations (TID1, TID2) in the NULL Context.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
H248_MG_TXT_AV_BV_07 Init: 2 phys term=TID1,TID2 in CID=NULL. Actions: Send Transaction Rq Audit Value, CID=NULL, TID=TID1
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to NULL
AUDIT VALUE Command request with
TID set to TID1
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to NULL
AUDIT VALUE Command reply with
TID set to TID1

Initial condition: 2 physical Terminations (TID1, TID2) in the NULL Context.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
H248_MG_TXT_AV_BV_08 Init: any. Test: Send Transaction Rq Audit Value, CID=NULL, TID=ROOT
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to NULL
AUDIT VALUE Command request with
TID set to ROOT
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to NULL
AUDIT VALUE Command reply with
TID set to ROOT
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
Text_Mode/
MG/
AV/
BI
H248_MG_TXT_AV_BI_01 Init: any. Test: Send Transaction Rq Audit Value, CID=CHOOSE, TID=CHOOSE
Action request with
CID set to CHOOSE
AUDIT VALUE Command request with
TID set to CHOOSE
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to CHOOSE
AUDIT VALUE Command reply with
TID set to CHOOSE
Error descriptor (e.g. value 401 "Protocol Error")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
H248_MG_TXT_AV_BI_02 Init: 2 eph term=TID1,TID2 in CID=CID1. Test: Send Transaction Rq Audit Value, CID=CHOOSE, TID=ALL(e12)
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CHOOSE
AUDIT VALUE Command request with
TID set to ALL(e12)
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to CHOOSE
AUDIT VALUE Command reply with
TID set to ALL(e12)
Error descriptor (e.g. value 401 "Protocol Error")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
H248_MG_TXT_AV_BI_03 Init: 2 eph term=TID1 in CID=CID1. Test: Send Transaction Rq Audit Value, CID=CHOOSE, TID=TID1
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CHOOSE
AUDIT VALUE Command request with
TID set to TID1
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to CHOOSE
AUDIT VALUE Command reply with
TID set to TID1
Error descriptor (e.g. value 401 "Protocol Error")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
H248_MG_TXT_AV_BI_04 Init:any. Test: Send Transaction Rq Audit Value, CID=CHOOSE, TID=ROOT
Action request with
CID set to CHOOSE
AUDIT VALUE Command request with
TID set to ROOT
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to CHOOSE
AUDIT VALUE Command reply with
TID set to ROOT
Error descriptor (value 410 "Incorrect identifier")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clauses 7.2.5 and 6.2.5
H248_MG_TXT_AV_BI_05 Init: 1 eph term=TID1 in CID=CID1. Test: Send Transaction Rq Audit Value, CID=CID1, TID=CHOOSE
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CID1
AUDIT VALUE Command request with
TID set to CHOOSE
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to CID1
AUDIT VALUE Command reply with
TID set to CHOOSE
Error descriptor (e.g. value 401 "Protocol Error")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
H248_MG_TXT_AV_BI_06 Init: 1 eph term=TID1 in CID=CID1. Test: Send Transaction Rq Audit Value, CID=CID1, TID=ROOT
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CID1
AUDIT VALUE Command request with
TID set to ROOT
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to CID1
AUDIT VALUE Command reply with
TID set to ROOT
Error descriptor (value 410 "Incorrect identifier")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clauses 7.2.5 and 6.2.5
H248_MG_TXT_AV_BI_07 Init: 2 eph term=TID1,TID2 in CID=CID1, 2 eph term=TID3,TID4 in CID=CID2. Test: Send Transaction Rq Audit Value, CID=ALL, TID=CHOOSE
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to ALL
AUDIT VALUE Command request with
TID set to CHOOSE
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to ALL
AUDIT VALUE Command reply with
TID set to CHOOSE
Error descriptor (e.g. value 401 "Protocol Error")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
H248_MG_TXT_AV_BI_08 Init: 2 eph term=TID1,TID2 in CID=NULL. Test: Send Transaction Rq Audit Value, CID=NULL, TID=CHOOSE
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to NULL
AUDIT VALUE Command request with
TID set to CHOOSE
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to NULL
AUDIT VALUE Command reply with
TID set to CHOOSE
Error descriptor (e.g. value 401 "Protocol Error")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
Text_Mode/
MG/
AC
Text_Mode/
MG/
AC/
BV
H248_MG_TXT_AC_BV_01 Init: 2 eph term=TID1,TID2 in CID=CID1. Test: Send Transaction Rq Audit Cap, CID=CID1, TID=ALL(e12)
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CID1
AUDIT CAPABILITIES Command request with
TID set to ALL(e12)
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to CID1
AUDIT CAPABILITIES Command reply with
TID set to TID1
AUDIT CAPABILITIES Command reply with
TID set to TID2
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
H248_MG_TXT_AC_BV_02 Init: 2 eph term=TID1,TID2 in CID=CID1. Test: Send Transaction Rq Audit Cap, CID=CID1, TID=TID1
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CID1
AUDIT CAPABILITIES Command request with
TID set to TID1
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to CID1
AUDIT CAPABILITIES Command reply with
TID set to TID1
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
H248_MG_TXT_AC_BV_03 Init: 2 eph term=TID1,TID2 in CID=CID1, 2 eph term=TID3,TID4 in CID=CID2. Test: Send Transaction Rq Audit Cap, CID=ALL, TID=ALL(e1234)
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to ALL
AUDIT CAPABILITIES Command request with
TID set to ALL(e1234)
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to CID1
AUDIT CAPABILITIES Command reply with
TID set to TID1
AUDIT CAPABILITIES Command reply with
TID set to TID2
Action reply with
CID set to CID2
AUDIT CAPABILITIES Command reply with
TID set to TID3
AUDIT CAPABILITIES Command reply with
TID set to TID4.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
H248_MG_TXT_AC_BV_04 Init: 2 eph term=TID1,TID2 in CID=CID1, 2 eph term=TID3,TID4 in CID=CID2. Test: Send Transaction Rq Audit Cap, CID=ALL, TID=TID1
2 Terminations (TID1 and TID2) in Context CID1, 2 Terminations (TID3 and TID4) in Context CID2
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to ALL
AUDIT CAPABILITIES Command request with
TID set to TID1
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to CID1
AUDIT CAPABILITIES Command reply with
TID set to TID1
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
H248_MG_TXT_AC_BV_05 Init: 2 eph term=TID1,TID2 in CID=CID1, 2 eph term=TID3,TID4 in CID=CID2. Test: Send Transaction Rq Audit Cap, CID=ALL, TID=ROOT
2 Terminations (TID3, TID4) in Context CID2.
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to ALL
AUDIT CAPABILITIES Command request with
TID set to ROOT
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to CID1
with an empty list of commands
Action reply with
CID set to CID2
with an empty list of commands
2 Terminations (TID3, TID4) in Context CID2.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
H248_MG_TXT_AC_BV_06 Init: 2 phys term=TID1,TID2 in CID=NULL. Test: Send Transaction Rq Audit Cap, CID=NULL, TID=ALL(p12)
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to NULL
AUDIT CAPABILITIES Command request with
TID set to ALL(p12)
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to NULL
AUDIT CAPABILITIES Command reply with
TID set to TID1
AUDIT CAPABILITIES Command reply with
TID set to TID2
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
H248_MG_TXT_AC_BV_07 Init: 2 phys term=TID1,TID2 in CID=NULL. Test: Send Transaction Rq Audit Cap, CID=NULL, TID=TID1
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to NULL
AUDIT CAPABILITIES Command request with
TID set to TID1
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to NULL
AUDIT CAPABILITIES Command reply with
TID set to TID1
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
H248_MG_TXT_AC_BV_08 Init: any. Test: Send Transaction Rq Audit Cap, CID=NULL, TID=ROOT
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to NULL
AUDIT CAPABILITIES Command request with
TID set to ROOT
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to NULL
AUDIT CAPABILITIES Command reply with
TID set to ROOT
Initial condition: any
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
Text_Mode/
MG/
AC/
BI
H248_MG_TXT_AC_BI_01 Init: any. Test: Send Transaction Rq Audit Cap, CID=CHOOSE, TID=CHOOSE
Action request with
CID set to CHOOSE
AUDIT CAPABILITIES Command request with
TID set to CHOOSE
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to CHOOSE
AUDIT CAPABILITIES Command reply with
TID set to CHOOSE
Error descriptor (e.g. value 401 "Protocol Error")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
H248_MG_TXT_AC_BI_02 Init: 2 eph term=TID1,TID2 in CID=CID1. Test: Send Transaction Rq Audit Cap, CID=CHOOSE, TID=ALL(e12)
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CHOOSE
AUDIT CAPABILITIES Command request with
TID set to ALL(e12)
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to CHOOSE
AUDIT CAPABILITIES Command reply with
TID set to ALL(e12)
Error descriptor (e.g. value 401 "Protocol Error")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
H248_MG_TXT_AC_BI_03 Init: 2 eph term=TID1,TID2 in CID=CID1. Test: Send Transaction Rq Audit Cap, CID=CHOOSE, TID=TID1
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CHOOSE
AUDIT CAPABILITIES Command request with
TID set to TID1
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to CHOOSE
AUDIT CAPABILITIES Command reply with
TID set to TID1
Error descriptor (e.g. value 401 "Protocol Error")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
H248_MG_TXT_AC_BI_04 Init: any. Test: Send Transaction Rq Audit Cap, CID=CHOOSE, TID=ROOT
Action request with
CID set to CHOOSE
AUDIT CAPABILITIES Command request with
TID set to ROOT
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to CHOOSE
AUDIT CAPABILITIES Command reply with
TID set to ROOT
Error descriptor (value 410 "Incorrect identifier")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clauses 7.2.5 and 6.2.5
H248_MG_TXT_AC_BI_05 Init: 1 eph term=TID1 in CID=CID1. Test: Send Transaction Rq Audit Cap, CID=CID1, TID=CHOOSE
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CID1
AUDIT CAPABILITIES Command request with
TID set to CHOOSE
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to CID1
AUDIT CAPABILITIES Command reply with
TID set to CHOOSE
Error descriptor (e.g. value 401 "Protocol Error")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
H248_MG_TXT_AC_BI_06 Init: 1 eph term=TID1 in CID=CID1. Test: Send Transaction Rq Audit Cap, CID=CID1, TID=ROOT
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to CID1
AUDIT CAPABILITIES Command request with
TID set to ROOT
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to CID1
AUDIT CAPABILITIES Command reply with
TID set to ROOT
Error descriptor (value 410 "Incorrect Identifier")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clauses 7.2.5 and 6.2.5
H248_MG_TXT_AC_BI_07 Init: 2 eph term=TID1,TID2 in CID=CID1, 2 eph term=TID3,TID4 in CID=CID2. Test: Send Transaction Rq Audit Cap, CID=ALL, TID=CHOOSE
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to ALL
AUDIT CAPABILITIES Command request with
TID set to CHOOSE
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to ALL
AUDIT CAPABILITIES Command reply with
TID set to CHOOSE
Error descriptor (e.g. value 401 "Protocol Error")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
H248_MG_TXT_AC_BI_08 Init: 2 eph term=TID1,TID2 in CID NULL. Test: Send Transaction Rq Audit Cap, CID=NULL, TID=CHOOSE
Ensure that the IUT, on receipt of a Transaction Request containing
Action request with
CID set to NULL
AUDIT CAPABILITIES Command request with
TID set to CHOOSE
acceptable Audit Descriptor
sends a Transaction Reply containing
Action reply with
CID set to NULL
AUDIT CAPABILITIES Command reply with
TID set to CHOOSE
Error descriptor (e.g. value 401 "Protocol Error")
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.5
Text_Mode/
MG/
NO
Text_Mode/
MG/
NO/
BV
H248_MG_TXT_NO_BV_01 Init: 1 eph term=TID1 in CID=CID1 with event descriptor. Test: Receive Transaction Rq Notify, CID=CID1, TID=TID1, valid ReqID and ObsEv
Initial condition: an Events Descriptor with specific RequestID was set at the IUT
for a specific Termination (TID1) in a specific Context (CID1). The IUT has detected the Events(s)
Ensure that the IUT, in order to indicate the detected event(s), sends a Transaction Request
containing:
Action request with
CID set to a specific CID1
NOTIFY Command request with
TID set to TID1
ObservedEvents Descriptor
specific RequestID
acceptable list of observed events
for a specific Termination (TID1) in a specific Context (CID1).
The IUT has detected the Events(s).
User Action: Generate events to create Notify Request.
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.7
H248_MG_TXT_NO_BV_02 Init: 1 phy term=TID1 in CID=NULL with event descriptor. Test: Receive Transaction Rq Notify, CID=NULL, TID=TID1, valid ReqID and ObsEv
Initial condition: an Events Descriptor with specific RequestID was set at the IUT
for a specific physical Termination (TID1) in the NULL Context. The IUT has detected
the Event(s).
Ensure that the IUT, in order to indicate the detected event(s), sends a Transaction
Request containing:
Action request with
CID set to NULL
NOTIFY Command request with
TID set to TID1
ObservedEvents Descriptor
specific RequestID
acceptable list of observed events

Initial condition: an Events Descriptor with specific RequestID was set at the IUT
for a specific physical Termination (TID1) in the NULL Context.
The IUT has detected the Event(s).
User Action: Generate events to create Notify Request.
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.7
H248_MG_TXT_NO_BV_03 Selection criteria: Event descriptor implemented and set at a Termination
Initial condition: an Events Descriptor with specific RequestID was set at the IUT
for the ROOT Termination. The IUT has detected the Event(s).
Ensure that the IUT, in order to indicate the detected event(s), sends a
Transaction Request containing:
Action request with
CID set to a specific NULL
NOTIFY Command request with
TID set to ROOT
ObservedEvents Descriptor
specific RequestID
acceptable list of observed events
User Action: Generate events to create Notify Request.
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.7
Text_Mode/
MG/
SC
Text_Mode/
MG/
SC/
BV
H248_MG_TXT_SC_BV_01 Initial condition: 2 Terminations (TID1 and TID2) in Context CID1
will be taken out of service after a specified ServerChangeDelay, sends a Transaction Request containing:
Action request with
CID set to CID1
SERVICE CHANGE Command request with
TID set to TID1
Service Change Descriptor
ServiceChangeMethod set to Graceful
ServiceChangeReason set to value 905
("Termination taken out of service")
ServiceChangeDelay set to a specific value (TSC_SCDtime)

Initial condition: 2 Terminations (TID1 and TID2) in Context CID1
User Action: Take TID1 out of service
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.8
H248_MG_TXT_SC_BV_02 Initial condition: 2 Terminations (TID1 and TID2) in Context CID1, 2 Terminations (TID3 and TID4)
in Context CID2.
Ensure that the IUT, in order to indicate that specific Terminations (TID1 and TID2) within a specific Context (CID1)
will be taken out of service after a specified ServerChangeDelay, sends a Transaction Request containing:
Action request with
CID set to CID1
SERVICE CHANGE Command request with
TID set to ALL
Service Change Descriptor
ServiceChangeMethod set to Graceful
ServiceChangeReason set to value 905
("Termination taken out of service")
ServiceChangeDelay set to a specific value (TSC_SCDtime)
Initial condition: 2 Terminations (TID1 and TID2) in Context CID1, 2 Terminations (TID3 and TID4)
in Context CID2.
User Action: Take all Terminations out of service
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.8
H248_MG_TXT_SC_BV_03 Initial condition: 2 Terminations (TID1 and TID2) in Context CID1, 2 Terminations (TID3 and TID4) in Context CID2
Ensure that the IUT, in order to indicate that a specific Terminations (TID1 and TID2) within a specific Context (CID1)
will be taken out of service after a specified ServerChangeDelay, sends a Transaction Request containing:
Action request with
CID set to ALL
SERVICE CHANGE Command request with
TID set to ALL
Service Change Descriptor
ServiceChangeMethod set to Graceful
ServiceChangeReason set to value 905
("Termination taken out of service")
ServiceChangeDelay set to a specific value (TSC_SCDtime)
Initial condition: 2 Terminations (TID1 and TID2) in Context CID1, 2 Terminations (TID3 and TID4) in Context CID2
User Action: Take all Terminations out of service
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.8
H248_MG_TXT_SC_BV_04 Initial condition: 2 Terminations (TID1 and TID2) in NULL context
Ensure that the IUT, in order to indicate that a specific Termination (TID1)
will be taken out of service after a specified ServerChangeDelay, sends a Transaction Request containing:
Action request with
CID set to NULL
SERVICE CHANGE Command request with
TID set to TID1
Service Change Descriptor
ServiceChangeMethod set to Graceful
ServiceChangeReason set to value 905
("Termination taken out of service")
ServiceChangeDelay set to a specific value (TSC_SCDtime)
Initial condition: 2 Terminations (TID1 and TID2) in NULL context.
User Action: Take Termination TID1 out of service
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.8
H248_MG_TXT_SC_BV_05 Initial condition: 2 physical Terminations (TID1 and TID2) in NULL context
Ensure that the IUT, in order to indicate that the Terminations TID1 and TID2
will be taken out of service after a specified ServerChangeDelay, sends a Transaction Request containing:
Action request with
CID set to NULL
SERVICE CHANGE Command request with
TID set to ALL
Service Change Descriptor
ServiceChangeMethod set to Graceful
ServiceChangeReason set to value 905
("Termination taken out of service")
ServiceChangeDelay set to a specific value (TSC_SCDtime)
Initial condition: 2 physical Terminations (TID1 and TID2) in NULL context.
User Action: Take all Terminations out of service
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.8
H248_MG_TXT_SC_BV_06 Initial condition: any
Ensure that the IUT, in order to indicate that the whole MG
will be taken immediately out of service, sends a Transaction Request containing:
Action request with
CID set to NULL
SERVICE CHANGE Command request with
TID set to ROOT
Service Change Descriptor
ServiceChangeMethod set to Graceful
ServiceChangeReason set to value 908
("Termination taken out of service")
ServiceChangeDelay set to a specific value (TSC_SCDtime)
Initial condition: any
User Action: Take the whole Media Gateway out of service
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.8
H248_MG_TXT_SC_BV_07 Initial condition: 2 Terminations (TID1 and TID2) in Context CID1, 2 Terminations (TID3 and TID4) in Context CID2
Ensure that the IUT, in order to indicate that a specific Termination (TID1) in a Context (CID1)
will be taken out of service after a specified ServerChangeDelay, sends a Transaction Request containing:
Action request with
CID set to CID1
SERVICE CHANGE Command request with
TID set to TID1
Service Change Descriptor
ServiceChangeMethod set to Forced
ServiceChangeReason set to value 905
("Termination taken out of service")
Initial condition: 2 Terminations (TID1 and TID2) in Context CID1, 2 Terminations (TID3 and TID4) in Context CID2.
User Action: Take TID1 out of service
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.8
H248_MG_TXT_SC_BV_08 Initial condition: 2 Terminations (TID1 and TID2) in Context CID1, 2 Terminations (TID3 and TID4) in Context CID2
Ensure that the IUT, in order to indicate that all Terminations within a specific Context (CID1)
will be taken out of service after a specified ServerChangeDelay, sends a Transaction Request containing:
Action request with
CID set to CID1
SERVICE CHANGE Command request with
TID set to ALL
Service Change Descriptor
ServiceChangeMethod set to Forced
ServiceChangeReason set to value 905
Initial condition: 2 Terminations (TID1 and TID2) in Context CID1, 2 Terminations (TID3 and TID4) in Context CID2.
User Action: Take all Terminations out of service
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.8
H248_MG_TXT_SC_BV_09 Initial condition: 2 Terminations (TID1 and TID2) in Context CID1, 2 Terminations (TID3 and TID4) in Context CID2
Ensure that the IUT, in order to indicate that a specific Terminations (TID1 and TID2) within all Contexts
will be taken out of service after a specified ServerChangeDelay, sends a Transaction Request containing:
Action request with
CID set to ALL
SERVICE CHANGE Command request with
TID set to ALL
Service Change Descriptor
ServiceChangeMethod set to Forced
ServiceChangeReason set to value 905
("Termination taken out of service")
Initial condition: 2 Terminations (TID1 and TID2) in Context CID1, 2 Terminations (TID3 and TID4) in Context CID2
User Action: Take all Terminations out of service
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.8
H248_MG_TXT_SC_BV_10 Initial condition: 2 physical Terminations (TID1 and TID2) in NULL context
Ensure that the IUT, in order to indicate that a specific Termination (TID1)
will be taken immediately out of service, sends a Transaction Request containing:
Action request with
CID set to NULL
SERVICE CHANGE Command request with
TID set to TID1
Service Change Descriptor
ServiceChangeMethod set to Forced
ServiceChangeReason set to value 905
("Termination taken out of service")
Initial condition: 2 physical Terminations (TID1 and TID2) in NULL context.
User Action: Take Termination TID1 out of service
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.8
H248_MG_TXT_SC_BV_11 Initial condition: 2 Terminations (TID1 and TID2) in NULL context
Ensure that the IUT, in order to indicate that the physical Terminations TID1 and TID2
will be taken immediately out of service, sends a Transaction Request containing:
Action request with
CID set to NULL
SERVICE CHANGE Command request with
TID set to ALL
Service Change Descriptor
ServiceChangeMethod set to Forced
ServiceChangeReason set to value 905
("Termination taken out of service")
Initial condition: any
User Action: Take all Terminations out of service
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.8
H248_MG_TXT_SC_BV_12 Initial condition: any
Ensure that the IUT, in order to indicate that the whole MG
will be taken immediately out of service, sends a Transaction Request containing:
Action request with
CID set to NULL
SERVICE CHANGE Command request with
TID set to ROOT
Service Change Descriptor
ServiceChangeMethod set to Forced
ServiceChangeReason set to value 908
("Termination taken out of service")
Initial condition: any
User Action: Take the whole Media Gateway out of service
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.8
H248_MG_TXT_SC_BV_13 Initial condition: 2 physical Terminations (TID1 and TID2) in NULL context which are out of service
Ensure that the IUT, in order to indicate that service will be restored for all Terminations
(TID1 and TID2), sends a Transaction Request containing:
Action request with
CID set to NULL
SERVICE CHANGE Command request with
TID set to ALL
Service Change Descriptor
ServiceChangeMethod set to Restart
ServiceChangeReason set to value 900
("Service Restored")
Initial condition: 2 physical Terminations (TID1 and TID2) in NULL context which are out of service
User Action: Restore All Terminations
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.8
H248_MG_TXT_SC_BV_14 Initial condition: 2 physical Terminations (TID1 and TID2) in NULL context which are out of service
Ensure that the IUT, in order to indicate that service will be restored for Termination TID1
in the NULL context, sends a Transaction Request containing:
Action request with
CID set to NULL
SERVICE CHANGE Command request with
TID set to TID1
Service Change Descriptor
ServiceChangeMethod set to Restart
ServiceChangeReason set to value 900
("Service Restored")
Initial condition: 2 physical Terminations (TID1 and TID2) in NULL context which are out of service
User Action: Restore All Terminations
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.8
Text_Mode/
MG/
AM
Text_Mode/
MG/
AM/
BV
H248_MG_TXT_AM_BV_01 Initial condition: idle
Ensure that the IUT, upon cold start, sends a Transaction Request containing:
Action request with
CID set to NULL
SERVICE CHANGE Command request with
TID set to ROOT
Service Change Descriptor
ServiceChangeMethod set to Restart

Initial condition: idle
User Action: Cold start the Media Gateway.
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 11.2
H248_MG_TXT_AM_BV_02 Initial condition: idle
Ensure that the IUT, upon cold start, sends a Transaction Request containing:
Action request with
CID set to NULL
SERVICE CHANGE Command request with
TID set to ROOT
Service Change Descriptor
TimeStamp

Initial condition: idle
User Action: Cold start the Media Gateway.
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 11.2
H248_MG_TXT_AM_BV_03 Initial condition: idle
Ensure that the IUT, upon cold start, sends a Transaction Request containing:
Action request with
CID set to NULL
SERVICE CHANGE Command request with
TID set to ROOT
Service Change Descriptor with
ServiceChangeReason set to 901("Cold Boot")

Initial condition: idle
User Action: Cold start the Media Gateway.
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 11.2
H248_MG_TXT_AM_BV_04 Initial condition: idle
Ensure that the IUT, upon cold start, in order to indicate a new address
for subsequent communication, sends a Transaction Request containing:
Action request with
CID set to NULL
SERVICE CHANGE Command request with
TID set to ROOT
Service Change Descriptor with
ServiceChangeAddress (for further communication)

Initial condition: idle
User Action: Cold start the Media Gateway.
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 11.2
H248_MG_TXT_AM_BV_05 Initial condition: IUT has sent a valid Transaction Request to perform a cold start
(e.g. ServiceChangeCommand request with the ServiceChangeMethod
set to Restart).
Ensure that the IUT, upon receipt of a Transaction Reply containing:
Action reply with
CID set to NULL
SERVICE CHANGE Command reply with
TID set to ROOT
Service Change Descriptor with
ServiceChangeMgcId
resends the valid Transaction Request to the MGC address given in the ServiceChangeMgcId.

Initial condition: IUT has sent a valid Transaction Request to perform a cold start
(e.g. ServiceChangeCommand request with the ServiceChangeMethod
set to Restart).
User Action: Cold start the Media Gateway.
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 11.2
H248_MG_TXT_AM_BV_06
Initial condition: IUT has sent a valid Transaction Request to perform a cold start
(e.g. ServiceChangeCommand request with the ServiceChangeMethod
set to RESTART
Ensure that the IUT, after timer expiry without having received the appropriate
Transaction Reply from its primary MGC resend the valid Transaction Request to
its secondary MGC to perform a cold start.

Initial condition: IUT has sent a valid Transaction Request to perform a cold start
(e.g. ServiceChangeCommand request with the ServiceChangeMethod
set to RESTART
User Action: Cold start the Media Gateway.
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 11.2
H248_MG_TXT_AM_BV_07 Initial condition: idle
Ensure that the IUT, upon cold start, having sent a ServiceChangeCommand request
with the ServiceChangeMethod parameter set to "RESTART", on receipt of a
message other than the corresponding ServiceChange Command reply, the IUT sends
a Transaction Reply containing error descriptor (value, 505, "Command received
before Restart Response").

Initial condition: idle
User Action: Cold start the Media Gateway.
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 11.2 last paragraph
H248_MG_TXT_AM_BV_08 Initial condition: idle
Ensure that the IUT, upon cold start, sends a Transaction Request containing:
Action request with
CID set to NULL
SERVICE CHANGE Command request with
TID set to ROOT
Service Change Descriptor
ServiceChangeMethod set to 2

Initial condition: idle
User Action: Cold start the Media Gateway.
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 11.3
H248_MG_TXT_AM_BV_09 Initial condition: IUT has sent a valid Transaction Request to perform a cold start
(e.g. ServiceChangeCommand request with the ServiceChangeMethod
set to RESTART)
Ensure that the IUT, on receipt of a Transaction Reply containing:
Action reply with
CID set to NULL
SERVICE CHANGE Command reply with
TID set to ROOT
Service Change descriptor with
ServiceChangeVersion set to 3
rejects subsequent Transaction Request with a Transaction Reply message containing
Error Descriptor (value 406, "Version not supported")

Initial condition: IUT has sent a valid Transaction Request to perform a cold start
(e.g. ServiceChangeCommand request with the ServiceChangeMethod
set to RESTART)
User Action: Cold start the Media Gateway.
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 11.2
H248_MG_TXT_AM_BV_10 Initial condition: IUT lost communuication with the MGC but it was subsequently
restored to the same MGC.
Ensure that the IUT, in order to indicate the previous lost of communication,
sends a Transation Request containing:
Action request with
CID set to NULL
SERVICE CHANGE Command request with
TID set to ROOT
Service Change Descriptor
ServiceChangeMethod set to Disconnect
ServiceChangeReason set to value 906
("Loss of lower layer connectivity")

Initial condition: IUT lost communuication with the MGC but it was subsequently
restored to the same MGC.
User Action:
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 11.4
H248_MG_TXT_AM_BV_11 Initial condition: any
Ensure that the IUT, on receipt of a Transaction Request containing:
Action request with
CID set to NULL
SERVICE CHANGE Command request with
TID set to ROOT
Service Change Descriptor
ServiceChangeMethod set to Handoff
ServiceChangeResearch set to value 903
("MGC directed change")
ServiceChangeMgcID set to the designated MGC address

Sends a Transaction Reply containing:
Action reply with:
CID set to NULL
SERVICE CHANGE Command reply with:
TID set to ROOT
User Action:
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 11.5
H248_MG_TXT_AM_BV_13 Initial condition: IUT received a Service Change command request with ServiceChangeMethod
set to Handoff together with a designated MGC address
Ensure that the IUT, in order to establish a new connection to the designated MGC,
sends a Transaction Request containing:
Action request with
CID set to NULL
SERVICE CHANGE Command request with
TID set to ROOT
Service Change Descriptor
ServiceChangeMethod set to Handoff
ServiceChangeResearch set to value 903
("Loss of lower layer connectivity")

Initial condition: IUT received a Service Change command request with ServiceChangeMethod
set to Handoff together with a designated MGC address
User Action:
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 11.5
Text_Mode/
MG/
TR
Text_Mode/
MG/
TR/
BV
H248_MG_TXT_TR_BV_01 Ensure that the IUT, on receipt of a Megaco message containing
Transaction Request with
TransID set to TransID1
acceptable Action request and Command request
sends a Megaco message containing
Transaction Reply with
TransID set to TransID1
acceptable Action reply and Command reply
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 8
H248_MG_TXT_TR_BV_02 VOID removed as no such requirement)
the IUT has sent a valid Transaction Reply
of the corresponding Transaction Response Acknowledge, resends the previous Transaction Reply
the IUT has sent a valid Transaction Reply
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09
PLEASE NOTE: This scenario was deprecated from the ETSI test specification
H248_MG_TXT_TR_BV_03 Selection criteria: 3 way handshake procedure supported
Initial condition: IUT has sent a valid Transaction Request with a Transaction ID set to TransID1
Ensure that the IUT, on receipt of a Megaco message containing
Transaction Reply with
TransID set to TransID1
acceptable Action reply and Command reply
sends a Megaco message containing
Transaction Response Acknowledge with
TransID set to TransID1
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 8
H248_MG_TXT_TR_BV_04 Selection criteria: Transaction Timer implemented
Initial condition: IUT has sent a valid Transaction Request with
a Transaction ID set to TransID1.
Ensure that the IUT, on expiry of the Transaction Timer without
receipt of neither a Transaction Reply nor a Transaction Pending,
resends the previous Transaction Request
a Transaction ID set to TransID1.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 8
H248_MG_TXT_TR_BV_05 Selction criteria: Transaction Timer implemented
Initial condition: After sending a valid Transaction Request
the IUT has received a valid Transaction Pending.
Ensure that the IUT, on expiry of the Transaction Timer without receipt
of the corresponding Transaction Reply or another Transaction Pending,
resends the Transaction Request
the IUT has received a valid Transaction Pending.
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 8
H248_MG_TXT_TR_BV_06 Selection criteria: Transaction Timer implemented
Initial condition: After sending a valid Transaction Request, the IUT has received a valid Transaction Pending.
Ensure that the IUT on receipt of a Megaco message containing
Transaction Reply with
TransID set to TransID1
acceptable Action reply and Command reply
sends a Megaco message containing
Transaction Response Acknowledge with
TransID set to TransID1
User Action: None
Config: Config1
SUT: MG or PG
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 8
Text_Mode/
MGC
H248_MGC_TXT_Start_01 Send ServiceChangeReq, wait for response
User Action: None
Config: Config1
SUT: MGC
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09
Text_Mode/
MGC/
AD
Text_Mode/
MGC/
AD/
BV
H248_MGC_TXT_AD_BV_01 Initial condition: any
Ensure that the IUT, in order to create an ephemeral termination in a new context,
send a Transaction Request containing:
Action request with
CID set to CHOOSE
ADD Command request with
TID set to Choose
User Action: None
Config: Config1
SUT: MGC
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.1
H248_MGC_TXT_AD_BV_02 Initial condition: Termination TID1 exists in the NULL Context
Ensure that the IUT, in order to add an existing physical Termination
from the NULL Context to a MG-assigned Context,
send a Transaction Request containing:
Action request with
CID set to CHOOSE
ADD Command request with
TID set to TID1
User Action: Generate an Add Request adding a physical termination TID1 to a context.
Config: Config1
SUT: MGC
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.1
H248_MGC_TXT_AD_BV_03 Initial condition: 2 Terminations (TID1 and TID2) exists in the NULL Context
Ensure that the IUT, in order to add 2 existing physical Terminations (TID1 AND TID2)
from the NULL Context to a MG-assigned Context,
send a Transaction Request containing:
Action request with
CID set to CHOOSE
ADD Command request with
TID set to ALL
User Action: Generate an Add Request adding the 2 physical terminations to a context.
Config: Config1
SUT: MGC
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.1
H248_MGC_TXT_AD_BV_04 Initial condition: Termination TID1 exists in Context CID1
Ensure that the IUT, in order to create an ephemeral termination
in an already existing specific context,
send a Transaction Request containing:
Action request with
CID set to CID1
ADD Command request with
TID set to CHOOSE
User Action: Generate an Add Request creating terminations to an existing context.
Config: Config1
SUT: MGC
Status: Mandatory
Ref: ACATS Megaco v2.0 (ETSI-TS-102-374-2 v1.1.1 (2004-11)) / ITU-T H.248.1 2005-09 clause 7.2.1
H248_MGC_TXT_AD_BV_05 Initial condition: 2 physical Termination (TID2 and TID3) exist in the NULL Context
An ephemeral Termination (TID1) ex